WIKA UPT-21 - Handbuch (Seite 27)

27 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
7. Display and operating unit, model DI-PT-U
7.4 Setting the main display
The main display can indicate the following values:
■ Pressure Applied pressure is indicated.
■ Level Level is indicated.
■ Current Output signal is indicated.
■ PV percent Output signal is indicated as a percentage.
■ Sensor temperature Temperature at the sensor is indicated.
■ PV (primary value) The value corresponding to the mode will be indicated.
If the mode is changed, then the main display will change.
1. Open the operating menu with [↵].
Select “Display” and confirm with [↵].
2. Select “Main display” and confirm with [↵].
3. Select value and confirm with [↵].
Main display indicates the selected value.