WIKA UPT-21 - Handbuch (Seite 51)

51 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
14. ... / 15. Dismounting, return and disposal
CAUTION!
If faults cannot be eliminated by means of the measures listed above, shut
down the process transmitter immediately, and ensure that pressure and/or
signal are no longer present, and secure the instrument from being put back
into operation inadvertently.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter 15.2
“Return”.
15. Dismounting, return and disposal
WARNING!
Residual media in the dismounted process transmitter can result in a risk to
personnel, the environment and equipment.
Take sufficient precautionary measures.
15.1 Dismounting
Only disconnect the pressure gauge once the system has been depressurised!
15.2 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous
substances (acids, bases, solutions, etc.).
When returning the instrument, use the original packaging or a suitable transport
packaging.