Setting the contrast of the lc display, Restoring factory setting, Gb 11. detail setup – WIKA UPT-21 Benutzerhandbuch
Seite 46
46
WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
11. Detail setup
11.5 Setting the contrast of the LC display
Setting range: 1 ... 9 (in steps of 1)
1. Open the operating menu with [↵].
Select “Detail setup" and confirm with [↵].
2. Select “Contrast” and confirm with [↵].
3. Change figure using [▲] [▼] and confirm with [↵].
Contrast is set.
11.6 Restoring factory setting
1. Open the operating menu with [↵].
Select “Detail setup" and confirm with [↵].
2. Select “Reset” and confirm with [↵].
3. Select the settings that are to be reset and confirm
with [↵].
Instru. spec.:
Instrument settings will be reset to their as-delivered
settings.
Drag pointer:
The drag pointer values are reset.
4. Confirm reset with [↵].
The settings are reset.