WIKA UPT-21 - Handbuch (Seite 33)

33 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
9. Configuration via display and operating unit
9.2 Setting the units
9.2.1 Setting the pressure unit
1. Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2. Select “Application” and confirm with [↵].
3. Select “Pressure” and confirm with [↵].
4. Select “Unit” and confirm with [↵].
5. Select pressure unit and confirm with [↵].
Pressure unit is set.
9.2.2 Set length unit (for level measurement)
1. Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2. Select “Application” and confirm with [↵].
3. Select “Level” and confirm with [↵].
4. Select “Unit” and confirm with [↵].
5. Select length unit and confirm with [↵].
Length unit is set.