Setting the density unit, Setting the temperature unit, Gb 9. configuration via display and operating unit – WIKA UPT-21 Benutzerhandbuch
Seite 34

34
WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
9. Configuration via display and operating unit
9.2.3 Setting the density unit
1. Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2. Select “Application” and confirm with [↵].
3. Select “Level” and confirm with [↵].
4. Select “Density” and confirm with [↵].
5. Select “Density unit” and confirm with [↵].
6. Select unit and confirm with [↵].
Density unit is set.
7. Select “Density value” and confirm with [↵].
8. Set digit using [▲] [▼] and confirm with [↵]. The
cursor moves to the next digit. Repeat for each digit.
Density value is set.
9.2.4 Setting the temperature unit
Temperature unit °C and °F selectable.
1. Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2. Select “Application” and confirm with [↵].
2. Select “Sensor temp.” and confirm with [↵].
3. Select temperature unit and confirm with [↵].