Gb 6. commissioning, operation – WIKA CTH6300 Benutzerhandbuch
Seite 21
21
WIKA operating instructions, models CTH6300 and CTH6500
2079988.04 07/2014 GB/D
GB
6. Commissioning, operation
For all measuring instruments the measuring channels can be selected
according to the model-specific measurement parameters. For the
version with only one probe the correct measurement parameter is
already set.
When using the measuring instruments with several channels and/or
different probes make sure that the correct measurement parameter is
set. See chapter 6.4.2 “Probe selection Prob”.
6.3 Menu structure and settings
Instrument settings such as measurement parameters, probe calibration, channel
deactivation, arrow keys, etc. are adjusted using a menu tree. To open the main menu,
press the ENTER/MENU key. Use the arrow keys ▲▼ to select the required menu items.
Press ESC to return to the measuring mode.
6.4 Menu tree
Unit
Prob
Lin2
CAL
Chnl
ArEA
Lo6
°C
P
T1-T2
OFF
OFF
c
OFF
°F
J
oP1
ON
m
ON
m/s
K
oP2
%rh
L
g/m³
N
°C td
R
°F td
S
Pa
T
hPa
RH
m³/s
D
Pr
H