WIKA CTH6300 - Handbuch (Seite 32)

32 WIKA operating instructions, models CTH6300 and CTH6500
2079988.04 07/2014 GB/D
GB
6. Commissioning, operation
During storage query the extremes MAX-MIN and the average value
AVE are not updated or calculated.
Clear storage (MAX-MIN-AVE)
Press CLEAR once. Clr appears on the display. All extremums (MAX-MIN and AVE)
measured up to that moment are deleted. After deletion of the storage the measuring
instrument switches back to the measuring mode automatically.
6.6 Changing measurement cycle (FAST mode)
Press FAST/▼ once. You are in the Fast mode now. The measuring instrument
measures 4 times per second now. Press FAST/▼ again and you will return to the
normal mode with 1 measured value per second again.
Note that the battery consumption in the Fast mode is approximately
three times higher than it is in the normal mode.
This setting is deactivated by switching off.
6.7 AUTO-OFF function
Press ESC-AUTO-OFF. dAoF is indicated on the display. The Auto-Off function is
deactivated now.
Press ESC-AUTO-OFF key again. EAoF is indicated on the display. The measuring
instrument is shut down automatically after 30 minutes.
dAoF = Disable Auto-off
EAoF = Enable Auto-off
This setting is deactivated by switching off (default setting is EAoF).