ALTANA Temp-Chart - Handbuch (Seite 141)

temp-chart Software temp-gard Hardware
64
In temp-gard drive, please select the drive letter your operating system has allocated to
your PCMCIA connection. With the Test button, you can check whether a valid temp-
gard SRAM-card is plugged in.
When you select Monochrome Printout, the program will only print black lines on a white
background, thus preventing a black and white printer from converting colors into grey
scales that can hardly be distinguished or invisible.
In Units, you can choose the value type and accuracy for each dimension. Please note
that you may use any type here, as temp-chart will automatically convert your input.
Please do not forget to operate the Apply button, otherwise the changes will not become
effective.
The Command Axes in the Index-tab Options at the Lower Screen Margin
Use this command to open the option page Axes. Like all entries in the options
notebook, these settings are not only valid for the template or measurement which is
currently open, but for the entire program.
From the left Axes List, select the axis that you want to reset. The current active settings
will appear on the right side:
x The Position of the time and temperature axes is predetermined.
x For the distance and zone axes, you can choose between Hide (i.e. the axis is not
shown), Below (the axis is shown below the time axis) and Above (i.e. the axis is
shown at the upper margin of the chart)
x The Name of an axis is the text used for labelling it
x If the option box Auto Scaling is ticked off, the program will calculate a new scaling
for each new measurement to show the entire measurement. If you want to compare
several measurements, you can enter their exact scaling in the Min and Max boxes.