ALTANA Temp-Chart Benutzerhandbuch
Seite 82
temp-gard Hardware temp-chart Software
5
Safety Information
Attention temp-gard data logger
The instrument must not be used to measure the temperature of objects that have live
parts.
Attention Hot Thermal Barrier
Never touch the hot thermocouple probes or the thermal barrier without appropriate
protective clothing (protective gloves) after leaving the hot area.
Attention (Hot) Heat Sinks
If a heat sink is damaged, the cooling agent might leak out. This liquid is non-toxic. Wait
until the liquid has cooled down. The dry residues can be wiped off with a cloth.
Immediate action in the event of
Skin contact:
clean affected areas with soap and water, remove contaminated clothing
Eye contact:
rinse with water for a prolonged time
Swallowing:
seek medical advice if unwell
Attention Overheating
The temp-gard is powered by two 1.5 Volts Mignon ALKALINE batteries. If these batteries
are subjected to temperatures above +70 °C over a long period of time they might leak. A
thermometer strip next to the battery case indicates exceeding temperatures. Overheating
might destroy the instrument. An overheated instrument always has to be checked by
technical service staff.
Attention Batteries
Leaking battery liquid (potash lye) attacks the mucous membranes. Avoid any contact with
eyes, mouth or nose. The liquid can be wiped off with a cloth. In case of skin contact, rinse
with water.