ALTANA Temp-Chart - Handbuch (Seite 111)

temp-chart Software temp-gard Hardware
34
The Command Delete in the Template Menu
With this command, templates you no longer need can be deleted and erased from the list
of available templates. The Delete template dialog box will appear and ask you to select
the templates you want deleted.
It is practicable to keep only such templates that you still need for preparing or reading
new measurements. Measurements already read and linked to a specific template no
longer require this template as all the information thereof are already incorporated in the
measurement.
The Delete template dialog box
To delete a template, select one or more from the list of available templates by clicking
into the selection box in front of each name. Confirm with OK to really delete all templates
ticked off, or undo with Cancel.
With the Select all button, you can select all the listed templates at once, while the Back
button will remove the markings.
Use the Shift button to turn round the selection of templates. This means that you can first
tick off all templates that you still want to keep and then turn the selection round by clicking
on the shift button. All templates you did not want to keep will then be deleted.
As it sometimes may be impossible to undo this command, the program will ask you for
confirmation for each template.