ALTANA Temp-Chart - Handbuch (Seite 128)

temp-gard Hardware temp-chart Software
51
The Index-tabs at the Lower Screen Margin
The Command Chart in the Index-tabs at the Lower Screen Margin
With this command, you can look at the temperature curves of the current measurement
and determine a section you would like to analyze or protocol.
On the Chart screen page, the following items are displayed:
x The temperature curves of all sensors. Individual curves can be shown or hidden with
the buttons in the toolbar.
x The selected reference curves. They can be shown or hidden with the button R in the
toolbar.
x The selected tolerance curves. They can be shown or hidden with the button T in the
toolbar.
With the scaling of the temperature and time axes preset by the program, the entire
measurement is visible. However, you can also select a fixed scaling in the axis page of
the options notebook in order to be able to easily compare various measurements. Here,
you can also determine if and where distance and zone axes shall be drawn.
On the Grid and Annotations pages in the options notebook, you can determine
whether or not a scaling grid is shown and which auxiliary lines are given.
You can also use this page to define zone-independent measurement sections.
The Command Scale Axes in the Index-tabs at the Lower Screen Margin
The chart view normally shows the entire measurement. If you want to look at a particular
detail or determine measurement sections for analyzing purposes – e.g. an ascending or
descending branch for slope calculation –you have two options: