ALTANA Temp-Chart - Handbuch (Seite 133)

temp-chart Software temp-gard Hardware
56
The Command Critical Values in the Index-tab Analysis at the Lower Screen Margin
Use this command to look at the Critical Values Analysis Page.
The table of results consists of eight columns:
No.
for the sensor number
Sensor for the name of the sensor
Min indicates for how long the curve was above the minimal threshold value
Low indicates for how long the curve was above the lower threshold value
Mid indicates for how long the curve was above the mean threshold value
High indicates for how long the curve was above the upper threshold value
Max indicates for how long the curve was above the maximum threshold value
Eqv. Time Indicates the corresponding equivalent heating time (see Equivalent
Time)
Please also see the chapter Sorting of Analysis Tables.
The first two lines show the set threshold values and duration times. To change them,
please use the critical values page in the setup notebook.
The Command Values in the Index-tab Analysis at the Lower Screen Margin
Use this command to look at the Critical Values in the Analysis Page. As this table is
showing individual values, it can sometimes be very long. This is why you are given the
opportunity to select a smaller range and/or a new sampling interval.
If you click on the option box Show Equivalent Holding Time, each column will not only
show the temperature value, but also the time of this temperature value taken as a basis
to calculate the equivalent time. This value is only important for very special analysis
tasks.