WIKA CPH6000 - Handbuch (Seite 57)

57 WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
ENTER
a
b
c
d
e
f
g
h
7.4.5 SETUP additional menu items: CPH-Configuration
7. Commissioning, operation
This menu section lists general instrument settings, such as:
a) Input possibility for an ambient temperature
b) Input possibility for a height difference between reference pressure sensor and test
item, used in the automatic correction (deduction of a head pressure)
c) Selection of the menu language (German/English/French/Spanish/Italian)
d) Date of the system clock (Year/Month/Day)
e) Time of the system clock (Hours/Minutes/Seconds)
f) Brightness of the backlighting of the display
g) Powersave function (automatic switch-off delay for backlight and internal 24 V test
item power supply).
If the instrument is idle for the set switch-off delay period (no keys pressed and
no digital communication), then the backlight and the 24 V test item power supply
will be switched off, until any key is pressed (except ON/OFF) or the instrument is
addressed over the digital interface.
h) Current battery level
At 10 % the low battery charge warning, "low BAT", is shown in the display.
Select menu item
Input via numerical keypad
Confirmation of the input
(Clear deletes the input)