WIKA CPH6000 - Handbuch (Seite 8)

8 WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
2. Safety
DANGER!
Danger of death caused by electric current
Upon contact with live parts, there is a direct danger of death.
■ Charging using a defective power supply unit (e.g. short circuit from
the mains voltage to the output voltage) can result in life-threatening
voltages at the instrument!
■ Only use the mains connector permitted by WIKA for the
ProcessCalibrator.
■ Only use a charger that is fully-functional or undamaged.
The safety of the operator may be endangered if, for example
■ there is visible damage to the instrument.
■ the instrument is not working as specified.
■ the instrument has been stored under unsuitable conditions for an extended period of
time.
If there is any doubt, please return the instrument to the manufacturer for repair or
maintenance.
2.4 Use of Lithium-Ion rechargeable batteries
WARNING!
Misusing Lithium-Ion batteries can lead to heating, explosion or ignition
and result in serious injury. Follow the safety instructions listed below:
■ Do not solder directly to the Lithium-Ion batteries.
■ Do not incinerate or heat the Lithium-Ion batteries.
■ The Lithium-Ion batteries must only ever be connected with the
correct polarity.
■ Never connect the positive terminal and the negative terminal of the
Lithium-Ion batteries to each other with any metallic object (such as
wire).
■ Never carry or store the Lithium-Ion batteries together with
necklaces, hairpins, or other metallic objects.
WARNING!
■ Lithium-Ion batteries should never be punctured with nails nor hit
with a hammer. In addition, Lithium-Ion batteries must never be
trodden on or exposed to other strong shocks or vibrations.
■ Lithium-Ion batteries must never come into contact with water or
salt water. Moreover, they must never get wet.