Lenze VisiWinNet VisiWinNET Smart - Handbuch (Seite 226)

Configuration
Projecte settings
Global project settings
5
l
226 SHP−VWNS DE/EN 6.1
5 Configuration
5.1 Projecte settings
VisiWinNET
â
Smart projects contain settings that have an effect on the runtime behaviour
of the project. In some cases, these settings are offered as soon as a project is created. Other
settings can be altered later during project configuration.
The settings of the project configuration can be reached via the node of the same name in
Project Explorer. Project Explorer divides the properties up into different areas. Clicking an
area causes the corresponding settings to be displayed in the VisiWinNET Property page.
The available settings depend on the type of the project.
5.1.1 Global project settings
Access: Project configuration
® Global
Index card on Properties page: Common
The Common project properties reflect the settings made in the Project Manager when the
project was created.
It is not possible to alter the settings shown here. The following standard task is performed
by other parts of the Project Manager.
ƒ Renaming of the project: This function is available in the Project Manager.
5.1.2 Common project properties
Access: Project configuration
® Global
Tab on Property page: Extended
The extended properties enable you to save general information in the project database.
5.1.3 Selection of the systems
Access: Project configuration
® Server components
Tab on Property page: Common
The systems selected here are shown as editors in the integrated development
acknowledgement. The editors are used to write the system−specific definitions into the
project database.
During the runtime, only the system servers selected here are loaded, i.e. if the trend
system is deselected, the recording functions of the trend server, for example, are not
active.