Lenze VisiWinNet VisiWinNET Smart - Handbuch (Seite 239)

Configuration
Communication
Configure MPI connection
5
l
239 SHP−VWNS DE/EN 6.1
MPI address: This is where to set the address of the EL1xx. The address must be
identical with the device address selected in the MPI−Applet of the EL1xx.
Time−out: Possible setting/time−out behaviour. Default setting: 1 s.
MPI Line: A communication relationship between the EL1xx and a PLC is called an MPI
line. A maximum of 10 lines can be set up; i.e. an EL1xx can exchange date with a
maximum of 10 PLCs per MPI.
MPI address: MPI address of the PLC.
Line active: Activates or deactivates an MPI line. Selecting "1" in the "Set value" field
activates the line.
Browse variables
5. in Project Explorer, click MPI channel with the right mouse button and select Browse
variables.
VWNS005