Lenze VisiWinNet VisiWinNET Smart - Handbuch (Seite 230)

Configuration
Communication
Transfer project via LAN to EL1xx
5
l
230 SHP−VWNS DE/EN 6.1
4. Select the TC/IP connection in the selection field Transfer settings.
In order to change the connection parameters, click Connect target. The IP address of
the EL1xx is shown if you double−click the network system in the status line at the
EL1xx.
5. In the field "Root directory for project transfer", specify the download destination
for the runtime program on the EL1xx. For example: \Flashdisk\VisiWinNet. Possible
download destinations:
\Flashdisk\xxxx: Flashdisk (program is retentive)
\Temp: RAM (program is volatile)
\Storage\xxxx: SD card (program is retentive and portable; is only offered if an SD card
has been plugged into the EL 1xx)
\Hard Disk\xxxx: USB memory medium (like SD card)
6. Click the
¬("Start project") button in the toolbar and following the instructions in
the dialogs.
A dialog is shown in which you can edit the previously allocated IP.
7. Click Accept.
The project is transferred to the target device.