WIKA DI25 - Handbuch (Seite 15)

15 WIKA operating instructions digital indicator, model DI25
14076218.01 12/2013 GB/D
GB
4. Design and function / 5. Transport, packaging ...
4.2 Scope of delivery
■ Display, sealing
■ 2 x mounting element
Cross-check scope of delivery with delivery note.
5. Transport, packaging and storage
5.1 Transport
Check the digital indicator for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change
in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
■ Storage temperature: -20 ... +50 °C
■ Humidity: 35 ... 85 % r. h. (no condensation)
Avoid exposure to the following factors:
■ Proximity to hot objects, when permissible ambient temperature is exceeded by
radiation.
■ Mechanical vibration, mechanical shock (putting it down hard), when the permissible
values are exceeded, see chapter 3 “specifications”.
■ Soot, vapour, dust and corrosive gases, when permissible limit values are exceeded.
■ Potentially explosive environments, flammable atmospheres.
Store the digital indicator in its original packaging in a location that fulfils the conditions
listed above. If the original packaging is not available, pack and store the instrument as
described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument along with shock-absorbent material in the packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag containing a
desiccant inside the packaging.
WARNING!
Before storing the instrument (following operation), remove any residual
media. This is of particular importance if the medium is hazardous to
health, e.g. caustic, toxic, carcinogenic, radioactive, etc.