1 changing video channels, 2 automatic settings, 1 changing – Guntermann & Drunck CATVision Benutzerhandbuch
Seite 97: Video, Channels, 2 automatic, Settings
Guntermann & Drunck GmbH
Operating Instructions
CATVision (MC)
5.4.4.1 Changing video channels
This function is only with CATVision-MC-Systemen available.
I V T
A c t i v e c h a n n e l : 1
C V M
The entry “active channel” refers to the corresponding used video channel.
The channels can be selected via pressing the keys
1
to
4
.
Confirm with
ENTER.
5.4.4.2 Automatic Settings
You can establish all video settings automatically. To do so, you must be
connected to a target.
To activate this function, press the
F5
key. While the settings for the active
channel are being established automatically, the monitor turns black for approx.
3 seconds.
With the
F6
key the settings will be established for all channels (only with
CATVision-MC systems). In this case, following message appears on your
monitor:
I n f o
C V M
Automatic Video Tuning
status
Channel
1:
ok
Channel 2: not connected
Channel 3: in progress
Channel
4:
wait
Please wait
Whilst the automatic measuring this windows informs you about the process of
the respective measurement.
page 23