Guntermann & Drunck FIBREVision - Handbuch (Seite 119)

Monitoring
46 · G&D FIBREVision
Querying firmware and monitor information (GETINVENTORY)
The GETINVENTORY command can be sued to query the firmware revisions of the
KVM extender as well as information about the connected monitor.
The following table lists the different fields as well as the possible states:
Rebooting the KVM extender (DOREBOOT)
Use the DOREBOOT command to reboot the computer module as well as the user
module.
Command:
<GETINVENTORY ReqID=”123”/>
Exemplary answer of the KVM extender:
<INVENTORY Ver="1" ReqID="123">
<FirmwareLocal>1.2.3</FirmwareLocal>
<FirmwareRemote>1.2.3</FirmwareRemote>
<MonitorManufacturer>Samsung</MonitorManufacturer>
<MonitorModel>Syncmaster</MonitorModel>
<MonitorSerial>H9XP4711123</MonitorSerial>
</INVENTORY>
Field Description Value
FirmwareLocal firmware version of the
computer module (CPU)
revision number
FirmwareRemote firmware version of the
user module (CON)
revision number
MonitorManufacturer manufacturer of the monitor read-out data
of DDC
MonitorModel model description of the monitor read-out data
of DDC
MonitorSerial serial number of the monitor read-out data
of DDC
Command:
<DOREBOOT ReqID=”123”/>
Reply directly before the KVM extender is rebooted:
<REBOOT ReqID=”123”/>
Reply if the command failed:
<FAIL ReqID=”123”/>