Burkert Type 1110 - Handbuch (Seite 6)

4 - 1110
DIGITAL INDUSTRIAL CONTROLLER
english
The digital industrial controller is designed as a PID controller for controlling tasks in
the process control technology. It represents a new controller generation based on a
microprocessor.
Either standard current/voltage and frequency-analog signals can be applied to the
scaleable controller inputs or resistance thermometers and thermocouples can be
connected.
Outputs for continuous standard signals or relay outputs can now be used as
controller outputs.
In addition, outputs for error reports and a binary input and output for additional
functions are available.
RS 232 or RS 485 / PROFIBUS serial interfaces are available as connection
options.
The following control tasks can be realised with the controller:
• Fixed setpoint control (single control loop)
• Fixed setpoint with feed forward control
• Follow-up control (external set-value)
• Ratio control
• Cascade control
The controller is characterised by user-friendly operation and has a backlit, easily
legible LCD plain language display.
The following operator actions can be carried out with menu support in various
operator control levels:
• Configuration (defining the controller structure),
• Parameter definition (setting controller parameters),
• Process operation (manual interventions).
Configuration and parameter definition data is stored in an EEPROM to protect
against power failures.
2 CHARACTERISTICS AND POSSIBILITIES OF USE
(OVERVIEW)
NOTE The digital industrial regulator complies with the 73/23/EWG
Low Voltage Regulations and the EMC 89/2338/EWG
Regulations.