Sony SIR-3400H - Handbuch (Seite 43)

(E)
4-1 SIR-3400H / SIR-3032i / SIR-3032W
4. Preparations
4-1. Connecting the Power Supply
4-1-1. AC Power Supply
Be careful to use the correct voltage since usage of an incorrect voltage can lead to a fire or failure
of the unit.
At shipping, the AC voltage is set to either 100/120 V or 220/240 V. The setting is displayed on the
sticker on the AC voltage selector switch. If you peel off the sticker and change the voltage, be sure
to always re-check the usage voltage before using.
c
. When the AC voltage selector switch is set to AC 100/120 V, supplying AC 198 to 250 V may damage the
recording unit’s internal circuitry.
. When the AC voltage selector switch is set to AC 220/240 V, the recording unit will not operate when
supplied with AC 90 to 132 V.
. The AC power cord has a safety earth. Be sure to connect the power cord to an earthed socket.
. When using a plug adaptor (3-pin to 2-pin) for the AC power cord, be sure to connect the green wire to
earth.
. Make sure that spike noise is not included when taking AC power from an inverter, etc.
. The internal backup battery is charged whenever the POWER switch is set to ON regardless of whether
the unit is in standby mode.