WIKA CTM9100-150 - Handbuch (Seite 16)

16 WIKA operating instructions, models CTD9100, CTB9100, CTM9100
11263911.02 05/2014 GB/D
GB
4. Design and function
1 Button P
■ Access to the set temperature adjustment
■ Access to the menu items and parameters
■ Input confirmation
2 Button 6
■ Reduction of value being set
■ Selection of individual menu item
■ Go back up one menu level
3 Button 5
■ Increasing value being set
■ Selection of individual menu item
■ Go back up one menu level
4 Button U
Recall the stored set temperatures
5 LED OUT 1
Signals the status of the outputs for the temperature
control
■ If LED OUT 1 is on, the calibrator or the micro
calibration bath is heating
■ If LED OUT 1 is not on, the calibrator or the micro
calibration bath is not heating
6 LED OUT 2
a) Heating instrument
Signals the status of the outputs for the fan control
■ If LED OUT 2 is on, the fan is running at higher
speed
■ If LED OUT 2 is not on, the fan is running at lower
speed
b) Heating and cooling instrument
Signals the status of the outputs for the temperature
control
■ If LED OUT 1 is on, the calibrator or the micro
calibration bath is cooling
■ If LED OUT 1 is not on, the calibrator or the micro
calibration bath is not cooling
7 PV display
■ Indication of the current reference temperature
■ Display of the individual modes, menu items and the
parameters
8 SV display
■ Set temperature display
■ Display of particular parameters in the individual
modes and the menu options
9 LED SET
Flashing signals access to the individual menu items
and parameters
4.7 Description of the operating elements
Front of the controller
Overview of the operating elements on the front of the controller
1 9
2
3
4 5 6
7
8