Ivoclar Vivadent IPS e.max CAD Chairside v.1 - Handbuch (Seite 93)

41
Material
Indication
Cementation method
Blasting
Etching
Conditioning / silanization
Cementation system
self-adhesive* /
conventional
–– 1 )
Variolink ® II,
Multilink ®
Automix
Vivaglass ® CEM
IPS e.max CAD
Veneers,
inlays, onlays,
partial crowns
Anterior and posterior crowns
adhesive adhesive
20 sec with IPS Ceramic Etching Gel
60 sec with
Monobond-S
60 sec with
Monobond-S
––
Variolink ® Veneer,
Variolink ® II,
Multilink ®
Automix
Lithium disilicate glass-ceramic
Seating
and
Follow-Up
Car
e
Seating
The conditioning of the restoration and the preparation depends on the cementation technique applied and the cementa-
tion material. For the cementation of IPS e.max CAD restorations, you may choose between the tried-and-tested cementa-
tion materials from Ivoclar Vivadent according to the indication.
The following list describes the basic working steps to prepare the seating. For a detailed description of the procedure,
please refer to the respective Instructions for Use of the cementation material used.
a. Conditioning of the restoration
Conditioning of the ceramic surface to prepare the cementation is decisive for generating a sound bond between the
cementation material and the all-ceramic restoration. The conditioning procedure depends on the choice of cementation
material according to the indication.
1 ) For adhesive cementation, the restorations must be silanized.
* Self-adhesive powder-liquid systems
** the range of products on offer may vary from country to country
Please refer to the respective Instructions for Use.
**