Guntermann & Drunck DL-Vision(M/S) - Handbuch (Seite 80)

Getting started
14 · G&D DL-Vision(M/S)
Getting started
After the KVM extenders have been properly installed, they can be immediately put
into operation.
Mind the following activation sequence while initiating the extenders:
1. Switch on the user module DL-Vision-CON .
2. Switch on the computer module DL-Vision-CPU .
3. Switch on the computer that is connected to the computer module.
Start-up
After the computer and user module has been switched on, the LEDs on the front
panel indicate the module’s operating status.
More information on this topic is given in the chapter Status displays on page 49 ff.
On-screen display at user module
The starting screen of the user module displays additional information about the start-
up, the firmware versions, and the IDs of the connected modules.
NOTE: The recommended activation sequence for the initiation ensures that the
KVM extender is able to read out the features of the connected monitor and to
transmit them to the computer (see DDC transmission with cache function on page 42).