Guntermann & Drunck DL-Vision(M/S) - Handbuch (Seite 81)

Initial configuration of the network settings
G&D DL-Vision(M/S) · 15
English
Initial configuration of the
network settings
Accessing the web application requires you to configure the network settings of the
device on which the web application is operated.
How to configure the network settings before integrating the device into the local
network:
1. Use a category 5 (or better) twisted pair cable to connect the network interface of
any computer to the device’s Network A interface.
2. Ensure that the IP address of the computer’s network interface is part of the sub-
net to which the device’s IP address belongs to.
3. Switch the device on.
4. Start the computer’s web browser and enter the URL 192.168.0.1 in the address bar.
5. Authenticate your user account against the web application.
6. Click the tools symbol in the toolbar.
7. Click the tabs Network > Interfaces .
NOTE: In the defaults, the following settings are pre-selected:
 IP address of network interface A: 192.168.0.1
 IP address of network interface B: address obtained using DHCP
 global network settings: settings obtained using DHCP
IMPORTANT: The network settings of the computer module or the user module have
to be separately configured via the integrated web application of both modules.
NOTE: Use the IP address 192.168.0.100, for example.
NOTE: Use the preset access data to log in to the administrator account:
 Username: Admin
 Password: 4658
Change the preset password of the administrator account. The manual of the
web application provides a detailed description of how to change the preset
access data.