WIKA CTD9300 - Handbuch (Seite 23)

9037926 03/2005
GB
Temperature Dry Well Calibrators CTD 9300
3. Moduses and Functions
23 WIKA Operating Instructions CTD 9300 Rev. 1
The basic setup menu is used for typical settings relating to the
general operation of the device, e.g. for calling the Info window that
provides information on the current hardware and firmware
versions or enables editing of the system and display parameters.
The step menu, e.g. can be used to create temperature profiles and
approach them cyclically.
3.1.1.1 Info Menu
The Info menu displays data on the measuring range, the date of
the last calibration, the current firmware ramp and the serial number
of the device.
Fig. 10: Info menu of a
CTD 9300
3.1.1 Basic Setup Menu
Depending on the device type, one
of the following measuring ranges
will be displayed:
„
CTD 9300-165 the measuring
range of from -30 °C / 165 °C
„ CTD 9300-650 the measuring
range of from 40 °C / 650 °C
The user cannot edit the settings in this window. The firmware
ramps will change accordingly after an update.
The individual serial number of the calibrators is displayed in the
Info menu and additionally on the type label on the rear of the
device.