WIKA CTD9300 - Handbuch (Seite 6)

9037926 03/2005
6
Temperature Dry Well Calibrators CTD 9300
1. General Instructions
WIKA Operating Instructions CTD 9300 Rev. 1
GB
1.2 Safety Instructions Relating to Operation of the Device
The temperature dry well calibrators of the CTD 9300 series have
been developed and manufactured in compliance with the state of
the art. This applies to the accuracy of measurement, the mode of
operation and the safe operation of the devices. To guarantee safe
operation, however, the operator must behave in an expertly and
safety-conscious manner.
Relevant instructions are included in this section. Warnings relating
especially to individual functional sequences and tasks are also
included in the respective sections of the present operating
instructions. These warnings are identified by special symbols.
Caution:
Use the calibrator exclusively in compliance with the descriptions
included in the present operating instructions. Failure to observe
the safety instructions and operating instructions will impair the
protective measures provided.
Danger!
Before touching the dry well or the adapting sleeve, check the
current dry well temperature since a heated device bears the
imminent risk of burns.
Since there are high temperatures on the top of the calibrator
directly in front of the dry well bore, the following warning has been
attached to this area:
Caution!
Directly to the right of the power switch the warning symbol is
displayed. It advises you to read the corresponding chapters
(e.g. chapter 2, chapter 3) of the operating instructions.
Fig. 1: Warning sign