WIKA CTD9300 Benutzerhandbuch
Seite 41
9037926 03/2005
GB
Temperature Dry Well Calibrators CTD 9300
3. Moduses and Functions
41
WIKA Operating Instructions CTD 9300 Rev. 1
The Interface menu is used to set the baud rate for data
transmission via the RS 232 interface and the protocol to be used.
Baud rate
2400 Baud, 4800 Baud and
9600 Baud are supported. They
are selected with the cursor
keys and enabled with the
SELECT key.
Protocol
The default setting is the standard protocol, which must always be
set when the calibrators are operated in combination with our
software. The following settings are possible:
Standard: standard protocol
Test:
in-plant test protocol
Display:
in-plant test protocol
The protocols are selected with the cursor keys and enabled with
the SELECT key.
Parity
For setting the parity. Default setting is "no". Other possible
settings are "even" and "odd".
3.1.3.4 Interface
Fig. 26: Interface parameters