WIKA CTD9300 - Handbuch (Seite 5)

9037926 03/2005
5 WIKA Operating Instructions CTD 9300 Rev. 1
Temperature Dry Well Calibrators CTD 9300
1. General Instructions
GB
1. General Instructions
1.1 Fundamental Safety Instructions
When performing any work on the device, always heed the national
safety instructions and accident prevention regulations as well as
the following safety instructions in the present operating
instructions.
Through the power cable, the device is supplied with a voltage
hazardous to people.
The faultless and safe operation of the device requires appropriate
transport, professional storage, setup, and use as intended as well
as cautious operation and servicing.
Applications other than those described in the present operating
instructions is regarded to be improper use and must thus be
excluded.
If faults cannot be eliminated, the device must be shut down
immediately and protected against inadvertent startup.
Danger!
Only the manufacturer is authorized to perform repairs.
Manipulation and modifications of the device are illegal.
Before replacing the safety fuse, the device must be disconnected
from the mains voltage by pulling the power plug out of the mains
socket.
For other important safety instructions, please refer to the
individual sections of these operating instructions.