WIKA CTD9300 Benutzerhandbuch
Seite 8
9037926 03/2005
8
WIKA Operating Instructions CTD 9300 Rev. 1
Temperature Dry Well Calibrators CTD 9300
1. General Instructions
GB
1.4
Duty to Take Due Care of the Operator
For safe operation of the device, the operator must especially
ensure that:
the device is exclusively used as intended (refer to the section
"Intended Use" in chapter "Device Description") and that no
hazardous media are used and all the technical specifications
are adhered to.
the device is operated in faultless, fully functional condition
only.
the present operating instructions are always available in legible
condition and complete at the application site of the device.
only authorised and qualified personnel operates, maintains and
services the device.
the operator of the device is periodically instructed in all
applicable operational safety and environmental protection
issues and that he/she is familiar with the operating
instructions, especially with the safety instructions contained
therein.
1.3
Ground Wire Monitoring
For checking the basic isolation of the heater, the calibrator is
equipped with a ground wire monitor. The monitoring unit operates
independently of the other controller components and switches off
the power supply of the heater as soon as the calibrator loses the
connection to the ground wire system of the isolation. Once the
connection to the ground wire system has been re-established, the
monitoring unit automatically reconnects the heating circuit to the
power system.