Guntermann & Drunck LwLVision - Handbuch (Seite 92)

Guntermann & Drunck GmbH Operating Instructions LwLVision
Page 26
7.2.2.2 Setting of AutoLogout
Through this setting you can activate an automatic LOGOUT of the system.
The automatic LOGOUT leads you back to the LOGIN mask like the manual
LOGIN with
F8 .
With this the system is protected against non authorized access and only after
a password entry in the LOGIN menu you can have access again to the
computers.
The time until the LOGOUT is set by moving the cursor to the line AutoLogout.
The current entry can be overwritten or edited after having pressed
ENTER .
Valid is a time between 1 and 60 minutes. The entry “0” sets the LOGOUT to
“OFF”.
With
ENTER you close the entry.
In order to save the settings, close the menu with
F1 .
7.2.2.3 Console Name
For using several switches every G&D unit can have a specific name – the
Console Name.
Move the cursor to the line Console Name. The current entry can be
overwritten or edited after having pressed
ENTER .
Valid is an entry of 10 alphanumerical characters. With
ENTER you close the
entry.
In order to save the settings and close this menu, press
F1 .