Document Outline

• DEUTSCH
  • Hinweise
  • 1 Beschreibung
  • 2 Lieferumfang:
  • 3 Installationsanleitung
    • 3.1 Hinweise zum Lichtwellenleiterkabel
    • 3.2 Installation der Sendeeinheit LwLVision-PC
      • 3.2.1 Videoanschluss am LwLVision/MC2-PC
      • 3.2.2 Weitere Anschlussmöglichkeiten
    • 3.3 Installation der Empfangseinheit LwLVision-REM
      • 3.3.1 Videoanschluss am LwLVision/MC2-Rem
      • 3.3.2 Weitere Anschlussmöglichkeiten
  • 4 Stromversorgung
  • 5 Einschalten des Gerätes / LED Anzeigen
  • 6 Video
    • 6.1 Unterstützte Auflösungen
    • 6.2 Signale
    • 6.3 Video-Optimierung
      • 6.3.1 Videoeinstellungen / Image Config
        • 6.3.1.1 Berechtigung
        • 6.3.1.2 Aufruf des Image Config
        • 6.3.1.3 Einstellungen im Menü Image Config
      • 6.3.2 Kein Bild am LwLVision-Rem
  • 7 Konfiguration
    • 7.1 Default-Zustand „REM SCREEN CONFIG“ über lokale Tastatur
    • 7.2 Konfiguration am LwLVision-Rem über OSD (AdonIS)
      • 7.2.1 Image Config
      • 7.2.2 Console Setup
        • 7.2.2.1 Einstellung des ScreenSaver
        • 7.2.2.2 Einstellung des AutoLogout
        • 7.2.2.3 Vergabe des Console Name
        • 7.2.2.4 Aktivierung der Kanalanzeige Display
        • 7.2.2.5 Einstellung der Display Position
        • 7.2.2.6 Einstellung der Menu-Position
        • 7.2.2.7 Einstellung der erweiterten Mouseunterstützung
        • 7.2.2.8 Keyboard Layout
      • 7.2.3 Config
        • 7.2.3.1 Image Config
        • 7.2.3.2 Rem Screen Config
          • 7.2.3.2.1 Res. Limit
          • 7.2.3.2.2 Resolution
          • 7.2.3.2.3 Refreshrate
          • 7.2.3.2.4 Use Monitor DDC limits
          • 7.2.3.2.5 Sync Output
          • 7.2.3.2.6 Set Defaults
          • 7.2.3.2.7 View DDC data
        • 7.2.3.3 System Config
          • 7.2.3.3.1 Definition des ersten Hotkeys
          • 7.2.3.3.2 Festlegung des Doppel-HotKey
          • 7.2.3.3.3 Set System Defaults (Supervisor-Funktion)
          • 7.2.3.3.4 Reset Videomode table
          • 7.2.3.3.5 Remote Video
          • 7.2.3.3.6 Local Video
          • 7.2.3.3.7 Permanent Access
          • 7.2.3.3.8 Festlegung der Time-Out-Zeit
          • 7.2.3.3.9 Aktivieren des Protected Mode
          • 7.2.3.3.10 Keyb. LED flash
          • 7.2.3.3.11 Festlegung des Scancodesatzes local
          • 7.2.3.3.12 Festlegung des Scancodesatzes remote
          • 7.2.3.3.13 V24 Mouse enable
          • 7.2.3.3.14 USB Multimedia Keyboard
          • 7.2.3.3.15 Analog Input Config
          • 7.2.3.3.16 Keyboard Type local
          • 7.2.3.3.17 Keyboard Type remote
        • 7.2.3.4 User Account
          • 7.2.3.4.1 Account enable / disable
          • 7.2.3.4.2 Vergabe des User-Namens
          • 7.2.3.4.3 Set Account Defaults
          • 7.2.3.4.4 Video Config access
          • 7.2.3.4.5 Rem Screen Config access
          • 7.2.3.4.6 System Config access
          • 7.2.3.4.7 User Account access
          • 7.2.3.4.8 Change Password
    • 7.3 Mouse Utility
    • 7.4 System Info
    • 7.5 Video Info
    • 7.6 Monitor Info
  • 8 Systembedienung
    • 8.1 Zugriffsmöglichkeiten
      • 8.1.1 Zugriff über OpenAccess
      • 8.1.2 Zugriff über definierte User
      • 8.1.3 Zugriff als Supervisor
    • 8.2 Umschaltung
    • 8.3 Manuelle Haltefunktion
    • 8.4 Protected Mode
    • 8.5 Dunkelschaltung des Monitors
    • 8.6 Dunkelschaltung des Monitors im Protected Mode
    • 8.7 Manueller Logout
  • 9 Serviceschnittstelle
  • 10 Informationen zur Audioübertragung
  • 11 Informationen zur optionalen Übertragung von USB 1.1 (transparent)
  • 12 Technische Daten
  • 13 Anhang
    • 13.1 HotKey-Belegungstabelle
    • 13.2 Passwort
• ENGLISH
  • Information
  • 1 Description
  • 2 Scope of Delivery
  • 3 Installation
    • 3.1 Information to the Optical Fibre Cable
    • 3.2 Installation of the transmitting unit LwLVision-PC
      • 3.2.1 Video connection to the LwLVision/MC2-PC
      • 3.2.2 Other connections
    • 3.3 Installation of the receiving unitLwLVision-REM
      • 3.3.1 Video connection to the LwLVision/MC2-Rem
      • 3.3.2 Other connections
  • 4 Power Supply
  • 5 Switching on the Devices / LED Display
  • 6 Video
    • 6.1 Supported Resolutions
    • 6.2 Signals
    • 6.3 Video Adjustment
      • 6.3.1 Video Settings / Image Config
        • 6.3.1.1 Authorization
        • 6.3.1.2 Call-up of Image Config
        • 6.3.1.3 Settings in the menu Image Config
      • 6.3.2 No picture at the LwLVision-Rem
  • 7 Configuration
    • 7.1 Default Condition “REM SCREEN CONFIG” via local keyboard
    • 7.2 Configuration at the LwLVision-Rem via OSD (AdonIS)
      • 7.2.1 Image Config
      • 7.2.2 Console Setup
        • 7.2.2.1 Settings of the ScreenSaver
        • 7.2.2.2 Setting of AutoLogout
        • 7.2.2.3 Console Name
        • 7.2.2.4 Activation of the Channel Display
        • 7.2.2.5 Setting of the Display Position
        • 7.2.2.6 Setting of the Menu Position
        • 7.2.2.7 Setting of the extended Mouse Support
        • 7.2.2.8 Keyboard Layout
      • 7.2.3 Config
        • 7.2.3.1 Image Config
        • 7.2.3.2 Rem Screen Config
          • 7.2.3.2.1 Res. Limit
          • 7.2.3.2.2 Resolution
          • 7.2.3.2.3 Refresh Rate
          • 7.2.3.2.4 Use Monitor DDC limits
          • 7.2.3.2.5 Sync Output
          • 7.2.3.2.6 Set Defaults
          • 7.2.3.2.7 View DDC data
        • 7.2.3.3 System Config
          • 7.2.3.3.1 Definition of the first Hotkey
          • 7.2.3.3.2 Definition of the Double-HotKey
          • 7.2.3.3.3 Set System Defaults (Supervisor Funktion)
          • 7.2.3.3.4 Reset Videomode table
          • 7.2.3.3.5 Remote Video
          • 7.2.3.3.6 Local Video
          • 7.2.3.3.7 Permanent Access
          • 7.2.3.3.8 Definition of Time-Out
          • 7.2.3.3.9 Activation of the Protected Mode
          • 7.2.3.3.10 Keyb. LED flash
          • 7.2.3.3.11 Definition of the local Scan Code
          • 7.2.3.3.12 Definition of the remote Scan Code
          • 7.2.3.3.13 V24 Mouse Enable
          • 7.2.3.3.14 USB Multimedia Keyboard
          • 7.2.3.3.15 Analouge Input Config
          • 7.2.3.3.16 Keyboard Type local
          • 7.2.3.3.17 Keyboard Type remote
        • 7.2.3.4 User Account
          • 7.2.3.4.1 Account Enable / Disable
          • 7.2.3.4.2 Allocation of the User Name
          • 7.2.3.4.3 Set Account Defaults
          • 7.2.3.4.4 Video Config Access
          • 7.2.3.4.5 Rem Screen Config Access
          • 7.2.3.4.6 System Config Access
          • 7.2.3.4.7 User Account Access
          • 7.2.3.4.8 Change Password
    • 7.3 Mouse Utility
    • 7.4 System Info
    • 7.5 Video Info
    • 7.6 Monitor Info
  • 8 System Operation
    • 8.1 Access Possibilities
      • 8.1.1 Access via OpenAccess
      • 8.1.2 Access via defined User
      • 8.1.3 Access as Supervisor
    • 8.2 Switching
    • 8.3 Manual Hold Function
    • 8.4 Protected Mode
    • 8.5 Dark Switching of the Monitor
    • 8.6 Dark Switching of the Monitor in the Protected Mode
    • 8.7 Manual Logout
  • 9 Service Interface
  • 10 Informations about the Audio transmission
  • 11 Informations about the transmission of USB 1.1 (transparent)
  • 12 Specifications
  • 13 Appendix
    • 13.1 HotKey Seizure Table
    • 13.2 Password