HEIDENHAIN ND 780 - Handbuch (Seite 155)

ND 780
31
I - 2 Gener
a
l Oper
ations f
o
r ND 780
Console Adjustment
The LCD's brightness and contrast can be adjusted for this console.
When in either Actual Value or Distance-To-Go mode, the Up/Down
arrow keys can also be used to adjust the contrast of the LCD. This
form is also used to set the display saver's idle time-out.
The display saver setting is the amount of time the system is idle
before the LCD is turned off. The idle time may be set from 30 to
120 minutes. The display saver can be disabled during the current
power cycle.
Language
The ND 780 supports multiple languages. To change the language
selection:
 Press the LANGUAGE soft key until the desired language selection
appears on the soft key and the form.

Press ENTER to confirm your selection.
Import/Export
Operating parameter information can be imported or exported over
the serial port.

Press the IMPORT/EXPORT soft key in the Setup screen.
 IMPORT and EXPORT soft keys are also available in the Mill Tool
Table screen.
 Press IMPORT to download operating parameters, or a Tool Table
from a PC.
 Press EXPORT to upload the current operating parameters, or the
Tool Table to a PC.
 To exit, press the C key.