HEIDENHAIN ND 780 - Handbuch (Seite 198)

74
I Operating Instructions
I - 4 T
u
rn
ing Specific Oper
ations
Import/Export
Tool Table information can be imported, or exported over the serial
port.

IMPORT, and EXPORT soft keys are available in the Tool Table
screen.
 Press IMPORT to download a Tool Table from a PC.
 Press EXPORT to upload the Tool Table to a PC.
 To exit, press the C key.
Tool Table Usage
Example:
Entering offsets into the tool table
TOOL/SET (Setting tool offsets
The Tool/Set operation can be used to set a tool’s offset using a tool
when the diameter of the workpiece is known.
Touch the known diameter in the X axis.
Press the TOOL soft key. Scroll to the desired tool.
Press the ENTER key.
Select the axis (X) key.
Enter the position of the tool tip, for example,
X=Ø 20 mm.
Remember to ensure the ND 780 is in diameter
display mode (Ø) if you input a diameter value.
Touch the workpiece face with the tool.
Cursor to the Z axis.
Set the position display for the tool tip to zero, Z=0.
Press ENTER.