Metrohm tiamo 1.2 Manual - Handbuch (Seite 122)

96 Workplace
Jumps to a new empty line. This increases the line number by +1 .
Functions
Applies the entered sample data in the corresponding line in the sample
table. If the end of the table has been reached then a new line will be gen-
erated automatically. The same function can also be triggered with the [En-
ter] key. However, with [Enter] the next line will also be jumped to automati-
cally.
Closes the input window. The current sample data will not be entered in the
sample table (this must first be triggered with
[Apply] ).
Import sample data
With the menu item Sample table, Import data... in the window sample table the dia-
log window Select files to import opens, in which the file from which the sample
data is to be imported must be selected.
File name
File name
Entry or selection of the file from which data is to be imported.
File type
[ *.csv ]
Selection of the import format for the import of data from a file (only *.csv
possible).
The sample data from the selected file is inserted at the end of the sample
table.
Note
Irrespective of the number of data fields defined on the tab Display , all sample
data in the format Method name;Sample positi-
on;ID1;ID2;ID3;ID4;ID5;ID6;ID7;ID8;Sample size;Sample size unit have to be de-
fined in the import file for each line.
Save sample table
With the menu item Sample table, Save in the window Sample table an existing sam-
ple table can be saved under its own name again without the window Sample ta-
ble, Save needing to be open.
When saving a newly created sample table with the menu item Sample table, Save
or when saving an existing sample table with the menu item Sample table, Save as...
the window Save sample table opens in which a name for the sample table can be
entered or selected.