Metrohm tiamo 1.2 Manual - Handbuch (Seite 569)

Commands 543
LIFT
Command for moving to a Work position, Shift position, Rinse position and
Special position with a Sample Processor.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command LIFT are configured in the following dialog win-
dow:
• LIFT
LIFT - Properties
Command name
25 characters, [ Lift # ]
Name of the command.
Device
Device name
Device name, [ not defined ]
Selection of a device from the device table. Only those devices being able
to execute the command are selectable. Additionally,
not defined can be se-
lected. In this case, the device name must be assigned by the user at the
start of the method.
Device type
Device types, [ 814 USB Sample Processor ]
Display or selection of the device type. If a device is selected under Device
name , this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.