Metrohm tiamo 1.2 Manual - Handbuch (Seite 548)

522 Method
Stop time
0 ... 999999 s, [ off ] (only Titrando)
Stops when the preset time has elapsed since the start of the dosing.
Filling rate
0.01 ... 166.00 mL/min, [ maximum ] (Titrando)
0.01 ... 150.00 mL/min, [ maximum ] (Titrino)
Speed at which the dosing cylinder is to be filled after dosing. The maxi-
mum filling rate depends on the cylinder volume of the exchange unit or
dosing unit used. In case the entered filling rate is too high for the selected
dosing device, the rate will be reduced automatically to the highest possi-
ble value.
Note
Lower filling rates should be entered for solutions with higher viscosities.
Monitoring
Definition of monitoring.
Command name
25 characters, [ DOS pH # ]
Name of the command.