Metrohm tiamo 1.2 Manual Benutzerhandbuch

Seite 51

Advertising
background image

Formula editor

25

Identifier

Description

Commands

.LP.QTY

Measured value (water) for last measuring point in µg

KFC

.LP.TEM

Temperature for last measuring point in °C

DET, MET, SET,
KFT, STAT, MEAS,
CAL MEAS, DOS

.LP.TIM

Time for reaching last measuring point in s

DET, MET, SET,
KFT, KFC, STAT,

MEAS, CAL MEAS,
DOS

.LP.UGE

Potential at generator electrode for last measuring point; 0 =
not defined
, 1 = <14 V, 2 = 14...28 V, 3 = >28 V

KFC

.LP.VOL

Volume for last measuring point in mL

DET, MET, SET,

KFT, STAT, DOS

.LPO

Current absolute lift position in mm (entry at end of command)

LIFT

.LST

Start time of loop command (

Date/Time

)

LOOP, CAL LOOP

.MA.GFL

Maximum gas flow in mL/min

MEAS T/Flow

.MA.MEA

Maximum measured value in the units of the measured value

DET, MET, SET,

KFT, STAT, MEAS

.MA.TEM

Temperature for maximum measured value in °C

DET, MET, SET,
KFT, STAT, MEAS

.MA.TIM

Time for reaching the maximum measured value in s

DET, MET, SET,

KFT, STAT, MEAS

.MA.VOL

Volume for maximum measured value in mL

DET, MET, SET,
KFT, STAT

.MI.GFL

Minimum gas flow in mL/min

MEAS T/Flow

.MI.MEA

Minimum measured value in the units of the measured value

DET, MET, SET,
KFT, STAT, MEAS

.MI.TEM

Temperature for minimum measured value in °C

DET, MET, SET,

KFT, STAT, MEAS

.MI.TIM

Time for minimum measured value in s

DET, MET, SET,
KFT, STAT, MEAS

.MI.VOL

Volume for minimum measured value in mL

DET, MET, SET,
KFT, STAT

.MR.MRC

Correlation coefficient for mean dosing rate for whole range

STAT, DOS

.MR.MRS

Standard deviation für mean dosing rate for whole range in
mL/min

STAT, DOS

.MR.MRT

Mean dosing rate for whole range in mL/min

STAT, DOS

.MTE

Temperature measurement with sensor; 1 = on, 0 = off)

DET, MET, SET,
KFT, STAT, MEAS
(without T/Flow),

CAL MEAS,
STDADD, DOS

.NMP

Number of measuring points in list of measuring points

DET, MET, SET,

KFT, KFC, STAT,
MEAS, CAL MEAS,
DOS

.RAN

Current absolute shift angle of the rack in ° referred to the axis

of the selected tower (entry at end of command)

MOVE

Advertising