Metrohm tiamo 1.2 Manual - Handbuch (Seite 300)

274 Database
y2 Axis
Command type
[ DET ], MET, SET, KFT, KFC, STAT, MEAS, MEAS T/Flow, DOS
Selection of the command type for which the curve properties are to be de-
fined. The curve properties defined per command type are saved per curve
window and per client.
Note
When the dialog window is opened the particular Command type that will be se-
lected as standard is that which applies for the curve shown in the curve win-
dow.
Autoscaling
[ on ], off
If this option is switched on then all axes in the curve window will be scaled
automatically.
Parameters for the graphical presentation of the curves on the y2 axis (right-hand
y axis).
Quantity
Command-dependent selection
Selection of the quantity to be shown on the y2 axis.
Label
50 characters, [ auto ]
Freely definable axis labeling for the y2 axis. With auto the label from the
field Quantity will be used.
Curve
Curve color
Color selection, [ pink ]
Selection of the color for the curve line.
Symbol
Symbol selection, [ off ]
Selection of the symbol for the display of the individual measuring points.
With
off the individual measuring points are not shown.