Metrohm tiamo 1.2 Manual - Handbuch (Seite 222)

196 Database
Curve field - y2 axis
Parameters for the graphical display of the curve on the y2 axis (right-hand y axis).
X pos.
0.0000 ... (max. page width) mm
x-position within the permitted section.
Y pos.
0.0000 ... (max. page height) mm
y-position within the permitted section.
Width
0.0000 ... (max. page width) mm
Width of curve field.
Height
0.0000 ... (max. page height) mm
Height of curve field.
Coomand type
[ DET ], MET, SET, KFT, KFC, MEAS, MEAS T/Flow
Selection of the type of command for which a curve is to be shown.
Command name
[ not defined ], 50 characters
Name of the command for which a curve is to be shown. With not defined
the first curve present in the determination with the selected Command type
will be produced as default.
Note
In the command name, the index in the format
.# must be specified additionally
(e.g. Chloride.1 ).
Autoscaling
[ on ], off
If this option is enabled then all the axes in the curve window will be scaled
automatically. In this case the fields Start value and End value cannot be ed-
ited.
Quantity
Command-dependent selection
Selection of the quantity to be shown on the y2 axis.