Metrohm tiamo 1.2 Manual - Handbuch (Seite 824)

798 How to proceed
7.9.3 Load working sample table
1. Select program part Workplace.
2. In subwindow Run , click on tab Determination series .
3. Click on menu item Sample table, Load... in subwindow Run .
The window Load sample table opens.
4. Select desired sample table anc click on [Load].
The sample data of the selected sample table is loaded into the working sample
table.
7.9.4 Edit working sample table
1. Select program part Workplace.
2. In subwindow Run , click on tab Determination series .
3. If desired, load existing sample table into working sample table.
4. Click on menu item Sample table, Properties... in subwindow Run .
The window Properties - Determination series opens.
5. Define properties for the determination series and close the window with [OK] .
6. Select desired line to be changed in subwindow Run .
7. Click on menu item Edit, Edit line in subwindow Run .
The window Edit line - Working sample table opens.
8. Select Method out of the desired method group, enter Sample position , sample
identifications ID1...ID8 , Sample size and Sample size unit and click on [Apply] .
The current sample data will be entered in the corresponding line of the working
sample table.
9. Repeat step 8 for each desired determination.
10. Close window Edit line - Working sample table with [Close] .
11. Click on menu item Sample table,Save as... in subwindow Run .
The window Save sample table opens.
12. Enter desired name in the field Name and click on [Save] .
The working sample table is saved under the required name as sample table.