Metrohm tiamo 1.2 Manual - Handbuch (Seite 50)

24 General program functions
Identifier Description Commands
.FP{#}.TIM Time for reaching fixed end point # (1...9) in s DET, MET, SET,
KFT, KFC, STAT,
MEAS (without
T/Flow)
.FP{#}.VOL Volume for fixed end point # (1...9) in mL DET, MET, SET,
KFT, STAT
.GP.VOL Volume for Gran end point in mL DET, MET
.GP.MEA Measured value for Gran end point in the units of the meas-
ured value DET, MET
.GP.TEM Temperature for Gran end point in °C DET, MET
.GP.TIM Time for Gran end point in s DET, MET
.HP{#}.MEA Measured value for HNP # (1...9) in mV (HNP = half-
neutralization potential) DET, MET
.HP{#}.TEM Temperature for HNP # (1...9) in °C DET, MET
.HP{#}.TIM Time for reaching HNP # (1...9) in s DET, MET
.HP{#}.VOL Volume for HNP # (1...9) in mL DET, MET
.IGF Initial gas flow (measured value at start of command) in
mL/min MEAS T/Flow
.IME Initial measured value (measured value before processing the
start condition) in the units of the measured value DET, MET, SET,
KFT, STAT, MEAS,
CAL MEAS,
STDADD, DOS
.ITE Initial temperature (temperature before processing the start
conditions) in °C
DET, MET, SET,
KFT, STAT, MEAS
(without T/Flow),
CAL MEAS,
STDADD, DOS
.LCO Loop counter = current number of completed loops both for
Repeat and While loops LOOP, CAL LOOP
.LP.CAx Calculated value x (1...3) for the last measuring point DET, MET, SET,
KFT, KFC, STAT,
MEAS, DOS
.LP.CHA Charge for last measuring point in mA·s KFC
.LP.DME Difference in measured values for last measuring point MET
.LP.DVT dV/dt for the last measuring point (SET, KFT, STAT, DOS) or
drift for last measuring point in µg/min (KFC) SET, KFT, KFC,
STAT, DOS
.LP.ERC ERC for last measuring point DET
.LP.EXx External value x (1...3) for last measuring point DET, MET, SET,
KFT, KFC, STAT,
MEAS, DOS
.LP.GFL Gas flow value for last measuring point in mL/min MEAS T/Flow
.LP.IGE Current pulse current for last measuring point in mA KFC
.LP.MEA Measured value for last measuring point in the units of the
measured value DET, MET, SET,
KFT, KFC, STAT,
MEAS, CAL MEAS,
DOS