Metrohm tiamo 1.2 Manual - Handbuch (Seite 99)

Manual control 73
General
Information about the attached rack is shown here. In addition the speed of rota-
tion and the lift speed for manual sample changer control can be set here.
Rack name
Shows the name of the attached rack. If no rack is attached then -------- will
be shown.
Rack code
Shows the rack code of the attached rack. If no rack is attached then -------
- will be shown.
Number of positions
Shows the number of positions of the attached rack. If no rack is attached
then
-------- will be shown.
Shift rate
5 ... [ 20 ] °/s
Speed of rotation for manual operation of the sample changer.
Lift rate
5 ... [ 25 ] mm/s
Lift speed for manual operation at the selected tower.
Swing rate
10 ... [ 55 ] °/s
Swing speed for manual operation of the swing head on the sample
changer.
Initialize the attached rack.
Note
During the initialization of the rack the following actions are carried out:
– Rack rotates to position for reading the rack code.
– Rack data from rack code is transferred to sample changer.
– Lifts are raised to 0 mm.
– Swing head moves back.