Metrohm tiamo 1.2 Manual - Handbuch (Seite 365)

Commands 339
Window
Measured value, Volume, Time, [ off ]
A range (window) can be defined on the measured value axis, on the vol-
ume axis or on the time axis. The break point evaluation will only be carried
out in the defined window. Only the first break point in the defined window
will be recognized.
Lower limit pH
[ -20.000 ] ... 20.000 (for Window = Measured value )
Value for the lower limit of the window.
Lower limit
[ 0.00000 ] ... 9999.99 mL (for Window = Volume )
[ 0 ] ... 999999 s (for Window = Time )
Value for the lower limit of the window.
Upper limit pH
-20.000 ... [ 20.000 ] (for Window = Measured value )
Value for the upper limit of the window.
Upper limit
0.00000 ... [ 9999.99 ] mL (for Window = Volume )
0 ... [ 999999 ] s (for Window = Time)
Value for the upper limit of the window.
Gran evaluation
on, [ off ] (only Titrando)
With the Gran evaluation titration curves are evaluated according to the
Gran plot procedure (see Titration commands - Evaluation - Gran evalua-
tion).
Procedure
[ Normalized ], Standard
Selection of the Gran procedure.
Initial volume
0.01 ... [ 50.00 ] ... 9999.99 mL
Volume which must be present in the measuring vessel before the com-
mand is started.
Lower limit pH
[ -20.000 ] ... 20.000
Value for the lower limit of the Gran evaluation range.
Upper limit pH
-20.000 ... [ 20.000 ]
Value for the upper limit of the Gran evaluation range.