Metrohm tiamo 1.2 Manual - Handbuch (Seite 791)

Audit Trail 765
Chapter 7
How to proceed
7.1 Audit Trail
7.1.1 Open Audit Trail
Note
The table can only be opened if the option Enable Audit Trail is switched on in
the Security settings.
1. Select program part Configuration.
2. Click on symbol or menu item Tools, Audit Trail .
The window Audit Trail opens.
3. If desired, click on menu item View, Column display and define the desired col-
umns and their sequence in the dialog window Column display .
7.1.2 Filter Audit Trail
1. Select program part Configuration.
2. Click on symbol or menu item Tools, Audit Trail .
The window Audit Trail opens.
Quick filter
3.
Click on symbol or menu item Filter, Quick filter .
After this function has been selected then, when navigating in the Audit Trail table,
the field in which the cursor is located will have a yellow background.
4. Double click on the desired field with the left-hand mouse key.
The contents of the field selected in the table will be set as a filter condition and
this filter will be used directly on the table.
Note
Within the filtered table the quick filter can be used again so that the number of
entries can be reduced step by step.
Define and apply special filter
3.
Click on symbol or menu item Filter, Special filter .
The dialog window Special filter opens for defining user-specific filters.
4. Define and save filter.
5. Click on [Apply filter] .
The table will be filtered.