Metrohm tiamo 1.2 Manual - Handbuch (Seite 156)

130 Workplace
Reset
Reset all precessed sample data lines to the status "not processed".
Move lines by drag & drop
The lines selected in the working sample table can be moved by drag&drop
into an opened sample table.
Copy lines by drag & drop
The lines selected in the working sample table can be copied with the Ctrl
key pressed down by drag&drop into an opened sample table.
Edit sample data
With the menu item Edit, Edit line on the tab Determination series the dialog window
Edit line opens.
The fields in this dialog window have the same color as the lines in the working
sample table:
Light gray background
Processed lines. Data in these lines can no longer be altered.
Orange background
Currently running line. If sample data is only altered after the start of the de-
termination (in the status
BUSY ) then this is regarded as being a live modifi-
cation.
White background
Lines that have not yet been processed. These lines can be edited.
Note
In these fields of this dialog window generally no formula can be entered.
Method
50 characters, method selection
Entry or selection of the method from the current method group with which
the determination is to be carried out.
Open the window Open method for the extended method selection, if sev-
eral method groups exist. If in this window a method from a different group
to the current method group is selected then from now on this group will be
the current method group for the quick selection of methods in the
Method
field.
Sample position
[ 1 ] ... 999
Position of the sample on the rack. This number is used to move to the
sample position with the command
MOVE . For this Target = sample position
must be set.
ID1 ... ID8
100 characters, selection from text templates