Metrohm tiamo 1.2 Manual - Handbuch (Seite 270)

244 Database
Note
If a variable is modified then with [Recalculate] all the selected determinations
will be recalculated with the new value. If one variable is not modified then when
several determinations are recalculated the original value of the variable will be
used (i.e. variables with the same name but different values will not be overwrit-
ten until they are deliberately altered).
Method
The method used for the focused determination is shown here with its tracks and
commands. A precondition is that the method is identical for all the determina-
tions that have been selected. The method structure can be modified as required
for the recalculation, i.e. all the functions of the Method editor are available.
Method name:
Shows the method name.
Version:
Shows the version of the method. For original methods the additional text
(original) appears after the version number. As soon as the method has
been modified the additional text (modified) appears after the version num-
ber. This information is saved with the determination data when the recalcu-
lated determination is saved.
Saved:
Shows the date and time at which the method version was saved.
Opens the Method editor in the separate dialog window Method editor . Here
it is possible to modify parameters from existing commands as well as to
insert and delete tracks and commands; however, the modified method
cannot be directly saved here. If the dialog window is closed with
[OK] then
the method will be checked. The modified method then appears on the reg-
ister card Methods with the addition (modified) . This modified method is then
applied to the selected determinations with [Recalculate] and can be saved
at any time with [Save as] .
Saves the modified method under the same name or under a new name. If
the modified method is saved under the name of an existing method then
all the earlier method versions will be deleted and a new version will be
generated with the number
1 .